05 stv river rocket

[smiley88]

Just a little input on what props to give a try before I make a purchase and what you guys are running and what you like .i have Triad built STV River rocket 260 20 inch mid CLE lower unit.. I would like an all-around prop with good holeshot nice mid-range decent Top end.. thank you in advance guys appreciate your time

[oldschoolltv]

Give a 28 et a try good all around prop.

[smiley88]

Thank you sir... my brother actually has a 28 Pro ET I know it's a four blade but I definitely want to check that bad boy out to

[capteliminator]

I like to cruise my river between 80-110 so i run cleaver props. My prop of choice is a 15.4x32 merc cleaver worked by Rich Junker at Leading Edge Propellors. If you are looking for holeshot and top end an ET style 3 blade prop would be a good candidate.

[smiley88]

Thank you sir I'll start checking around

[Hydro-Peep]

In my experience ET's are pretty good all around props beside the hole shot, they are a nice thick heavy duty durable prop. My personal favorite all around prop is a 26p Yamaha, it has fantastic hole shot, carries the boat nice, and pretty decent top end. Hard to beat a Yamaha prop out of the hole, they are on the thin side though.

Just my 2 cents

[smiley88]

I appreciate you bro I will definitely be doing some checking around I like to keep that top end though

[smiley88]

On the 26th pitch Yamaha props that you like that you are referring to do you like 14 or 14 and a half or 15 diameter

[Hydro-Peep]

Whatever diameter the true Yamaha's are, I forget now. We usually run a true Yamaha that has been worked for a tunnel.

[smiley88]

I appreciate you bro if you run across any please keep my number in mind 559-761-3869

[Michael J Giesler]

Real yammi's are 14" dia

[smiley88]

Thank you guys I'm just trying to get dialed in so I got some decent top speed cool holeshot and nice mid-range pool

[smiley88]

So I've been looking at Yamaha drag props can anybody give me the specific dimensions on exactly what to look for pitch diameter Etc it's for a CLE lower unit small shaft 1.87 gears