User Tag List
Thanks: 0
Likes: 0
Results 1 to 3 of 3
Thread: Promax blowing trim fuse
-
04-24-2017, 05:59 PM #15000 RPM
- Join Date
- Apr 2017
- Location
- Holland,MI
- Posts
- 350
- Thanks (Given)
- 2
- Thanks (Received)
- 19
- Likes (Given)
- 16
- Likes (Received)
- 34
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Promax blowing trim fuse
I'm at a loss with this. Just finished putting a promax 225 on my already rigged boat and it keeps blowing the trim pump fuse cutting all power to the motor. I've already inspected all the wires in the boat and none of them are shorting or arching. Is it a solenoid? Or something else?
-
04-24-2017, 06:52 PM #25000 RPM
- Join Date
- Apr 2017
- Location
- Holland,MI
- Posts
- 350
- Thanks (Given)
- 2
- Thanks (Received)
- 19
- Likes (Given)
- 16
- Likes (Received)
- 34
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
It happens just when it is idling or higher rpm's. I could push the trim up and down all day and it won't blow, only after running for a minute or so, just instantly cuts power, can't even turn it over. Replace the fuse and everything works again.
-
04-27-2017, 11:56 AM #3
20 amp fuse should be connected to batt side of the starter solenoid. if it only blows when running must have a short on the purple circuit some where in the harness.
Dave1980 Cougar 19 tunnel,90 2.4L Bridgeport EFI in middle of restoration.
1988 BAJA Sunsport 186, 96 225 Pro Max
79 12' Auminum, 95 Merc 9.9
RIP Stu
"So many idiots, so few bullets"
Similar Threads
-
Mercury Tech: 225X fuse blowing???
By tozlakes in forum Technical DiscussionReplies: 9Last Post: 06-11-2014, 09:33 AM -
Blowing trim pump fuse
By 2fast4mom in forum Technical DiscussionReplies: 0Last Post: 04-06-2013, 03:56 PM -
Keep blowing 20amp fuse...why?
By Raddude! in forum Technical DiscussionReplies: 6Last Post: 06-20-2009, 10:28 PM -
2.4 blowing 20 amp fuse
By Toostrokin in forum Technical DiscussionReplies: 2Last Post: 05-05-2006, 05:47 AM -
2.5 blowing fuse
By blackcloud in forum Technical DiscussionReplies: 4Last Post: 09-21-2005, 08:28 AM