Does Six ten epoxy stick to metal

**aggiestckl** · 10-01-2016, 02:46 PM

Want to fill a hole with epoxy and pass pipe through it and than eventually remove the pipe.

Does metal stick to epoxy or can u grease metal than pull it out? How does this work

**flabum1017** · 10-01-2016, 04:53 PM

what diameter hole? Why not use a fiberglass tube with the inside diameter you want to end up with and epoxy it in.....

**HStream1** · 10-02-2016, 04:48 AM

Glenn YES Epoxy will adhere to metal. But you can apply a release agent such as Grease or wrap the pipe with parchment paper to use as a release agent.

BTW Respond to my text sent to you last week please

Originally Posted by aggiestckl

Want to fill a hole with epoxy and pass pipe through it and than eventually remove the pipe.

Does metal stick to epoxy or can u grease metal than pull it out? How does this work

**Greg G** · 10-02-2016, 07:55 AM

Originally Posted by flabum1017

what diameter hole? Why not use a fiberglass tube with the inside diameter you want to end up with and epoxy it in.....

I would think if the hole is less than 1/2" this would be the better way to go. You could slice in a few shallow kerfs to get the epoxy to bed into the pvc pipe as well.