OMC Crossflow V6 & Looper v8 Stuff

[drlinde]

Getting too old time to clean out the garage.
I thought I would see if there is any interest in my stuff. Everything is in good condition.

Evenfire crossflow crank with the correct timer base
Gold second effort light flywheel
Land and Sea ported 2.6 block .030
Second Effort mod 2.6 hood with matching flat belly pan
Lots of ignition power packs and timer bases for 2.6
Set of .030 pistons, rings, pins for same they have the intake half circle cut in them (new)
Land and Sea 10 port reed boxes
1978 235 carbs several sets
Land and Sea race head set
velocity stacks
I'm sure theirs more but need to did out more
Many sets of stock rods

Now for the V8 stuff
Monty's ported 4 litre short block with his heads
MAD EFI racing fuel injection system complete (new)
several gold flywheels
severals sets of Big bore carbs 2 new 2 used these are complete assys
Many Big bore carb bodies only
Mad EFI 16" midsection only (new)
Timer bases and stators etc for early motors
Light V8 hoods I have several
2 complete 20" midsections with solid mounts
5 complete gearcases some 20 and some 25" and 1 c/r
6 cranks
lots more parts for same
1 Merc Sport master 1.5 ratio complete never run

I"m retired and a snow bird between Wisconsin and Florida so delivery might be possible on some items
I haven't priced anything yet because i want to see what interest you guys might have
Dave Lindemann 218-590-6769 cell or this site or drlinde@chartermi.net
Prices , not cheap but fair
Thanks for you time

[Hydrovair]

Hi, I am interested in the crossflow evenfire crank and base, and the gold flywheel.
what are you looking to get for these part.

Regards, Jeff

[outlaw 10.5]

I'm interested in 2 gold flywheels for the V8's. How much delivered to Maryland 20639.
Thanks
Tim

[drlinde]

Hello again
I want to thank everyone that has called, texted and e-mailed. I will answer everyone's questions as soon as possible. Frankly, I didn't know so many people would be interested.
I have lots more stuff still to be unboxed. I have lots of early heavy looper rods and 4 empty V8 blocks; they are all 3.6 or bored to 4 litres (one has fingers and port work). I also have several sets of solid upper and lower motor mounts for loopers and crossflows. I plan to take pictures of everything and post them with prices as soon as possible.

Thanks
Dave

[atclen]

I would like to talk to you about the MAD EFI system for the V8, and the timer bases

[spk]

What you would want for the Monty's ported 4 litre short block with his heads

[drlinde]

For those waiting for pictures, I can't find the cord to transfer pics to computer; I will get a new one tomorrow. I also just found out that I have to be out of one storage area that I am renting by the weekend. I will get to the pics as soon as I can. The MAD EFI system has been sold pending funds; also, the Evenfire crank flywheel and timer base has also been sold pending funds. Thank you for your patience. Dave

[4-MULA-V]

Interested in v8 short mid, cowlings and v8 lightweight flywheel
jerry 651-214-7712

[bruzercomp81]

I'm interested in the crossflow even fire crank and timer base if it hasn't sold yet

[Banana Boat]

I need a timer base for a 1985 275 evinrude . Hopefully you still have one .

[graynester]

how much for the sportmaster

[rockman69]

Sent a PM on tues. have not heard back. Interested in the following:

V8
1 crank
1 Light cowl (all same or diff. style?)
1 flywheel

2.6
also, 2.6 light cowl/pans. L&S heads, reed boxes.
thank you!

[afr]

what ya want for a v8 20 inch lower unit

[drlinde]

To the forum members who have expressed an interest in my parts: I entered my ad too early--I had not figured out prices yet--I didn't expect that there would be so much interest. I have decided to list the parts with pictures and prices as I unpack them and post them in the parts and accessories section. This will take some time and I am very sorry for any inconvenience this may have caused.
Dave

[rockman69]

Anyone heard from this guy? No new posts about the above items as stated.