User Tag List
Results 1 to 15 of 20
-
08-24-2016, 12:54 PM #1
Taylor Mid 3 L 2nd Generation!!! For Joe Perog.
OK!!! So here it is finally. People that want the 3L Taylor Mid back in Production!!! I finally received my first Casting from the Foundry early last week for Joe Perog to Powdercoat. Joe had it drop shipped direct so he as I know never saw it. I will provide a totally honest assessment of it compared to the 1 st generation version that I have successfully powdercoated many of.
(1) The casting quality was WAY better than original. (2) There were less grinding gouges, pot holes casting flaws etc than original. (3) there were still areas of concern that needed to be addressed. Following is a Album of start to finish. Everything was Powdercoated from start to finish. No paint etc.
Congratulations to Todd Defilipps for taking on the task of acquiring the Patterns and keeping this Mid in Production for the 3L Guys!!! You've done a GREAT Job Todd!!!
Sand, Smooth, Fill and smooth.
After masking and filling all threaded holes. Two coats of Powder epoxy Primer were applied.
After a final inspection a final Top coat of Gloss Black was applied.
Last edited by HStream1; 08-25-2016 at 10:32 AM.
Bud Conner "Heathen" "Defending Our Constitution"
FOR ALL ENGINE APPLICATIONS
DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!
-
ghost28 thanked for this post
-
08-24-2016, 03:04 PM #2
Nice work!
What do you use for filling? Should be heat resistant right?
-
08-24-2016, 04:38 PM #3
Last edited by HStream1; 08-24-2016 at 04:41 PM.
Bud Conner "Heathen" "Defending Our Constitution"
FOR ALL ENGINE APPLICATIONS
DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!
-
08-24-2016, 05:16 PM #4Screaming And Flying!
- Join Date
- Apr 2001
- Location
- Miami,Fl
- Posts
- 6,990
- Thanks (Given)
- 128
- Thanks (Received)
- 80
- Likes (Given)
- 1268
- Likes (Received)
- 368
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
That's gorgeous wow
-
HStream1 thanked for this post
-
08-24-2016, 06:21 PM #5
Incredible work ! Can't wait to see it on the boat. Mike
Cheaters never Win !!!
-
HStream1 thanked for this post
-
08-24-2016, 07:02 PM #6
That looks awesome
action mobile marine, 772 528 0754, dealers for aces fuel products,wolf efi, pro marine,latham and gaffrig/livorsi. we build gearcases and modify them(3 litre) to ratchet, and powerheads as well. 21 skater/3 litre wolf efi 113 mph the engine build http://www.screamandfly.com/showthre...-3-litre-build
-
HStream1 thanked for this post
-
08-24-2016, 07:10 PM #7
Really nice job guys.
I see a pair of them in the future............
Double Rigged
308 Skater w/400r’s
Over-Kill
-
HStream1 liked this post
-
08-25-2016, 10:03 AM #8
Sweet Bud.... That is truely a piece of art. Your spoilin me (us) as we expect only the best!!! Gary
"12" Super Lite Tunnel (11') "88" 25 Yammy twin carb "BANANA SPLIT"
"77" Hydrostream Viper "87" 140 Rude heavy modded w/15" mid, Bobs nose and lwp "DANGER ZONE"
"72" Checkmate MX-13 "80" 75 Rude w/15"mid and Nitro Lu (to be restored)
"Too much is never enough" Keith Richards " Dreams become reality via hard work and perseverance" G.A.Carbonneau
"This coming from an old man that strapped two bananas together, hung a motor on it and calls it a boat" XstreamVking
-
HStream1 thanked for this post
-
08-25-2016, 12:51 PM #9
Who is selling these now?
-
08-25-2016, 07:50 PM #10
gorgeous
1984 28 ghost twin 200 Yamah ProVs (SOLD)
1997 21 Superboat Legend 250 VMAXXX (SOLD)
2001 25 Concept CC 250EFI (SOLD)
2002 24 Superboat Step 250EFI (SOLD)
1997 21 Checkmate Pulsare 200EFI Merc (Beater Boat)(SOLD)
1994 20 Hydrasport 225 Optimax (SOLD)
1998 27 progression Twin 225 Mercs (SOLD)
2005 23 Kryptonite 300 Promax (SOLD)
-
08-25-2016, 08:06 PM #11
-
08-26-2016, 07:41 AM #12
Todd DeFilipps (239)293-4731 Info@wickedpowerboats.com Wickedpowerboats.com
Bud Conner "Heathen" "Defending Our Constitution"
FOR ALL ENGINE APPLICATIONS
DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!
-
2.5-21 thanked for this post
-
08-26-2016, 08:03 AM #135000 RPM
- Join Date
- Sep 2014
- Location
- Iowa
- Posts
- 280
- Thanks (Given)
- 8
- Thanks (Received)
- 16
- Likes (Given)
- 44
- Likes (Received)
- 89
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Anyone have any idea as to what a 300xs would weigh on one of these mids with a sporty?
-
08-26-2016, 08:05 AM #14
-
08-26-2016, 08:21 AM #15Supporting Vendor
- Join Date
- Jun 2008
- Location
- Maryville, Tennessee
- Posts
- 1,019
- Thanks (Given)
- 28
- Thanks (Received)
- 28
- Likes (Given)
- 49
- Likes (Received)
- 258
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Bud PM sent.
Dave Hensley
1986 XR2002 /12" Mariner and string steering
18' Pugh Hydro
1992 XTB-21/225 ProMax
The barn is emptying out!!!
Similar Threads
-
I started painting and rigging Joe Perog's STV River Racer today
By WILDMAN in forum General Boating DiscussionReplies: 135Last Post: 08-13-2016, 04:47 AM -
the next generation S&F ers ?
By euro scott in forum The Scream And Fly LoungeReplies: 3Last Post: 07-13-2008, 12:33 PM