89 evinrude 225 boring

**powerabout** · 07-21-2016, 07:28 PM

I thought the timer base and flywheel have to match ( and of course pack if you want SLOW) but can put slow flywheel and timer base on old engine?
Or a non slow flywheel and sensor on a SLOW? ( but you eliminate the SLOW)
Is that Correct Racer

**91 charger stv** · 07-22-2016, 09:53 AM

Up date from hell lol well frank came over yesterday we tried everything we could to fix it w8th zero luck so frank suggested we take the cylinder head off just to make sure I didn't put the pistons in wrong and low and behold they are in wrong fml. I must say that I'm getting good at tearing this thing down and putting back together with all this practice I'm giving my self so I got it ripped down in 2hrs I will up date u guys when I get it back together the right way this time thanks for everyone's help

**58Evinrude** · 07-22-2016, 11:04 AM

I hpoe you've got the rods in the right way too.

**91 charger stv** · 07-22-2016, 11:07 AM

They were right nippes up it was getting lots of oil everything looks fine in the cylinder

**58Evinrude** · 07-22-2016, 01:18 PM

Nipples up? LOL, sounds like a hot g/f. Should be oil holes up

**powerabout** · 07-22-2016, 08:05 PM

while you have the flywheel off, might be a good idea to check what version it it

**racer** · 07-23-2016, 06:51 AM

Slow is not controlled by flywheel but quick start does involve flywheel. Timer and pack must match, you can run a non quick start flywheel on a quick start engine if you disable the quick start by disconnecting the orange wires coming from the stator, this is why the race wheel works as you change to a 10 amp stator which does not have the ability.

**powerabout** · 07-23-2016, 08:55 AM

how does that work if the sensor magnets in the flywheel hub are in a different position on the different flywheels, say 86 versus 96 on a v6 re timing?

**racer** · 07-23-2016, 06:32 PM

6:30 is the non quick start ignition.

**powerabout** · 07-23-2016, 07:34 PM

Originally Posted by racer

6:30 is the non quick start ignition.

so what happens if you put an early flywheel on a late ignition and vice versa?

**racer** · 07-23-2016, 08:54 PM

Early on late with no quick start ok. Late does not work on early.

**91 charger stv** · 08-19-2016, 09:34 AM

K guys sorry it's been a while been working like a slave but I got her all back together and running great got to take her out for a water test and it ran really good the motor and the boat I want to thank everyone that help me through this learning experience and a special thanks to franks never would of been able to do it with out him