Worlds fastest hydrostream viper

[realspeed714]

We all know Ronnie's viper and the speeds it went but was it the fastest right hand steer viper in the world?? Im trying to go with the same concept with a factory viper no pad work right hand steer and just huge HP.And is the 110 mph barrier posable?? right now my boat sits 105.6 at 7700 with my friend in the passenger seat in fresh water, i kno the boat still had more but we ran out of room. the motor is a virgin 260 with a brucato box and svs it is heavily detuned so power isn a problem.it has a ronnie 15 mid sportmaster running a b blades cut merc cleaver 14 1/4 32. So lets here the combos and numbers!!! let the trash talking begin.

[realspeed714]

[sunshine patty]

no trash talk from here, best wishes and lots of luck , let us send you something to compliment your efforts. we will send you a T-shirt or something

[3rd Gen]

Camped next to this rig just this weekend nice viper! Ed

[Superbender]

That's great numbers your running,should be real proud not an easy task,good luck with your goal

[realspeed714]

That's great numbers your running,should be real proud not an easy task,good luck with your goal

thank you il be posting all the progress and when il be at tanner going for a new number on this page

[realspeed714]

no trash talk from here, best wishes and lots of luck , let us send you something to compliment your efforts. we will send you a T-shirt or something

thanks man im gonna need it.And if you have any 280s sitting around that would be great to send my way lol

[sunshine patty]

thanks man im gonna need it.And if you have any 280s sitting around that would be great to send my way lol

I sort of need the 280 I have , but I was thinking more along the lines of a Tshirt for the girl friend or a hat . . post a vid of that killer fast Hydrostream

[CUDA]

Why not blueprint the pad?
It's just a little sanding, I'm not talking about changing , just make sure the last few feet are straight.

[realspeed714]

No ones got any none speeds??

[JWTjr.]

Why not blueprint the pad?
It's just a little sanding, I'm not talking about changing , just make sure the last few feet are straight.

When it's boats not political discussions, Cuda and I agree for sure. Straightening and sharpening the bottom is the oldest trick in the book, and the most effective. Sure beats spending thousands on mod motors that are more powerful yes, but so much less tractable and reliable.

[jasonpijanowski]

That boat should run 105 with a 24 pitch prop if you get the motor tuned in...I bet you can go faster with a smaller prop then that 32...

[Peddledown]

I assume the cores been done.

[frederick55]

Sounds like it's running great, but I really like the yellow Action in the background!

[2.5-21]

get that slip down closer to 10 percent