User Tag List
Thanks: 0
Likes: 0
Results 1 to 7 of 7
-
03-26-2015, 08:05 PM #1
Smartcraft Vessel Veiw Question/ 300xs
Hello-
Quick question with 300xs and smart craft. On my smart craft vessel view the main gauge shows the oil sign and it is in gallons (See attached picture). I am guessing there is a sensor I can purchase, install in my oil tanks and it will show the oil level???? What is the part number for this sender? How does it hook up?
Thanks!
Don
-
03-27-2015, 07:56 PM #2
Don
Do not have the part number but if you call TNT they can order it or I can have Guy look it up. It is a kit and wires to the harness on the motor. You have to purchase that harness separately from the 14pin harness. The plug is on the same side as the 14pin. If you have a fuel reading on the vessel view you already have it. Add the kit to tank and hook up the wire from that harness. Someone may have cut the cable short. Wiring diagram in the kit that you order I believe. Hope this helps.
Thanks
Double Rigged
308 Skater w/400r’s
Over-Kill
-
03-28-2015, 08:27 AM #3
Thank you for the information!
-
03-28-2015, 08:56 AM #4
Anyone got a pic I'd like to get this also or a pn
-
03-28-2015, 09:41 AM #5
I think this is it but I will find out more next week
http://www.mercruiserparts.com/Show_...log+to+Digital
-
03-28-2015, 10:46 AM #6
OK what's part # for harness to go from the oil sender to the mercury j box or smartcraft harness
-
03-29-2015, 06:42 AM #7
The cable assy is item number 4. There is a plug on the motor it will plug into to. There is a part number for the float level kit also not sure if they show that one.
Double Rigged
308 Skater w/400r’s
Over-Kill