User Tag List
Thanks: 0
Likes: 0
Results 1 to 5 of 5
Thread: 1983 Vector Knees
-
01-23-2015, 12:21 AM #1
1983 Vector Knees
I fabricated knees by fuseing 3 pieces of 1/2 marine ply toghether,therse glass between the pieces,fused to boat with cabisl putty ,then glassed over with 1708.I fused the knees,slashell stingers,transom together.Everting fit perfect(19 gal gas tank,battery).Installed previously removed slashwell,had to trim to clear the knees.
-
01-23-2015, 06:52 AM #2
Was the transom itself solid? If the cracks in the corners were "working" could be a bad sign.Hope it's all good.---Nice boat.
-
01-23-2015, 04:21 PM #3
Replaced rotton floor,core,transom,stringer.All composite,should never rot again....Scott..
-
01-23-2015, 05:25 PM #4
Good to hear that you done it all.You will have a nice ride for years.
-
01-31-2015, 04:39 PM #5
good to know your tank is held in by some strong straps