Pro max / laser style injection to air horn intake

[jeff dunn]

This 7 peddle intake allows you to run a air horn and injectors from a 260/280/ drag to increase performance on your 7 peddle promax injected motors. Comes with reed plate and plate to bolt air horn to, and injector studs. price ( $ 720.00 shipped in usa.) 843 222 9498 Jeff

[Go Time]

Jeff, cool piece. Got any in action and info on performance gains.

[jeff dunn]

Only this one at this time, ran good but was on a light boat also with small pitch prop, performance was better than the laser style for sure. Rpm came up faster.
i also tested it on a drag motor, and it ran as good or better than stock. Some say wetting the reeds is better , but I have no proof. Thanks jeff

[jdewaard]

Jeff, what else would be needed to make this setup work? 260 injectors, air horn, ECU? What ECU would be run? What fuel curve? Very cool piece!!!

[jeff dunn]

You can use air sensor from your stock intake.
you will need a air horn, fuel rail and injectors from a 260/ 280/300.
i used an a6 56 psi brain, but a 40 psi will work.

[jeffsnowboarding]

These are really nice are you gonna make more I wouldn't mind having one

[jeff dunn]

They will be built upon order, when you get ready give me a call for more details. 843 222 9498
cad drawins for 5 peddle intake are done, so I can build also.

[jeffsnowboarding]

Thank you glad to see someone is building these parts thanks jeff

[jeff dunn]

Bump for dec. thanks

[jeff dunn]

Due to material cost and a better machine process I can offer a better price, new price is $720.00 shipped. For those that have talked me about this , you will get new price. Thanks