User Tag List
Thanks: 0
Likes: 0
Results 1 to 15 of 31
Thread: Billit heads.?
-
11-18-2014, 07:23 AM #1
Billit heads.?
Might someone have a billit head for a 2.5 with the water jacket cover off that you can take
a picture of and share.? Need a set of heads for my 2.5 project and just thinking of making a set.
I have my 2 piece 2.4 heads apart on the bench and im wondering if its really just that simple.
thanks.!
Dago.
-
11-18-2014, 09:44 AM #2
-
11-18-2014, 10:01 AM #3
What I would like to build are heads with each cylinder having a replaceable combustion chamber as is seen with sled and motorcycle 2 stroke engines. This way each chamber is a lathe turning that can be quickly swapped as desired for tuning. Being my next project will have a 4 stroke on the back I am not the one to build this.
Regards,
Charlie North
If it ain't broke, modify it.
80 21' Superboat with Yamaha 225 Excel power
76 Glastron to be powered by a 6.2 L92 with surface drive
87 Glastron CVX20 Hull
-
11-18-2014, 10:26 AM #4
Thanks Kevin.
They just seem so simple. What am I missing.?
Water in and water out. I see no orings for the water cover.?
Again what am I missing.?
Thanks.
Dago.
-
11-18-2014, 11:29 AM #5
Search topgun marine on here. A lot to making nice ones, and yes they use o rings.
2023 TUFF 25
-
11-18-2014, 11:42 AM #6
-
11-18-2014, 11:55 AM #7
Awesome thanks guys.!
Dago
-
11-18-2014, 01:21 PM #8Mirage Jaguar RiverRacer
Polaris PRO785
Bennington 255LCC
Scream & Fly Flying Machine of the Month: September 2005
http://www.screamandfly.com/showthre...ild&highlight=
-
11-18-2014, 03:28 PM #9The Historic Photo Master
- Join Date
- Jan 2004
- Location
- Florida
- Posts
- 37,836
- Thanks (Given)
- 64
- Thanks (Received)
- 1667
- Likes (Given)
- 337
- Likes (Received)
- 19216
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Whats old...is new again. All these head types/ideas have been produced over the years, for both JohnRude and Merc V-6's.
-
11-18-2014, 04:15 PM #10Markus' Performance Boating Links:
www.toastedmarshmallow.com/performance
-
11-18-2014, 08:38 PM #11
-
11-19-2014, 10:14 AM #12Markus' Performance Boating Links:
www.toastedmarshmallow.com/performance
-
11-19-2014, 06:56 PM #13
In the late 80's and early 90's I was into Jet Ski's and the made Interchangeable Domed heads. They sealed with a copper O''rings. They worked great, if I raced at sea level or up in the mountains, I had good compression. I don't remember who made them.
-
11-19-2014, 07:18 PM #14
Who made the ones for a Merc 2.5 with the interchangeable chambers?
Dose any one have a set thy want to let go?
-
11-19-2014, 07:30 PM #15
Unless He Stopped Making, Brendon Power Makes Them For Merc. 2.5's With The Inerchangable Chambers...Different Color's To... They Wern't Cheep Though!!