GM TPI Intake

[H2OPERF]

Any one got a Clean GM TPI intake from a camero/vette , looking for a complete upper and lower with fuel manifold if I can find it, Thanks Dave

[Slimm]

Any one got a Clean GM TPI intake from a camero/vette , looking for a complete upper and lower with fuel manifold if I can find it, Thanks Dave

I have one in the attic at my parents' house, probably been there 12 years or so. I can't remember 100% but I 'think' it had Lingenfelter runners. I can run up there this weekend and dig it out.


Slimm

[H2OPERF]

Sounds good, dig it out. My 350 is a 91 but I think they are all the same until the vortec heads in 95. Thanks Dave

[Slimm]

Any one got a Clean GM TPI intake from a camero/vette , looking for a complete upper and lower with fuel manifold if I can find it, Thanks Dave

[Slimm]

[H2OPERF]

looks like it will clean up . is the throttle shaft free ?, Do you need a chopper for the bass rig, small shaft 22p merc. Thanks., Dave

[H2OPERF]

give me a call 305 302 5410 Dave

[Slimm]

give me a call 305 302 5410 Dave

Sorry for the delay, been really swamped at the shop and doctors appointments. if you want to swap that prop for this intake that's fine, unless you have something else more suitable or other 2.5 stuff. I am not using this intake and if it helps you out then I am happy to help.


Slimm

[H2OPERF]

No problem, just thought you may want the prop, let me know what you need ,I really don't have that much 2.5 merc stuff anymore. I have a complete set of carbs. reeds and intake, from a 200, I have an old lower unit that's got a small crack in the housing but the shafts and gears are fine, not sure what you need but I definitely want the tpi parts you have, im sure we can swap out something.

[Slimm]

Pm me your address and I will try to get this sent out to you tomorrow.

Slimm