1976 apricot flake Hydrostream Vector project $1500

**gregpro50** · 09-30-2013, 02:45 PM

Boat and trailer only.

This boat has been sitting and sitting and I don't think I am ever going to finish it. I bought it with every intention to rebuild it and worked on it quite a bit until I came across my Varmint and built that instead. Even now if I did finish it I would never use it so I think it is time to let it go.

The core was bad when I got it so I removed that. The stringers were solid but I put new ones in anyway. All the core underneath the floor has been installed and the floor has been put in. It needs the core installed on each side of the floor put in and a layer of glass installed over the floor. I used West System epoxy for everything and I used balsa core.

The finish on the boat is average for the age and it has stress cracks. The transom is solid. I've stored it inside since I've had it.

I have a dual cable steering setup I'll include. The seats were taken apart to rebuild but I have all the vinyl, foam, and original wood to use as templates.

The windshield has a crack. The original trailer is solid but has surface rust and should be repainted (the pictures show it sitting on a different trailer). The tires are weather checked pretty bad although they did make the 5 hour trip home when I bought it.

I'd trade for stuff if you don't have money to spend. I'm looking for a 14' aluminum boat/motor, atv's or go karts for my kids or whatever.