Hello all,

I recently rebuilt my Chevy LS6 454. I replaced the Mallory dual point distributor with a Pertronix mag pickup distibutor. On the old Mallory there was a post on the base of the distibutor, where a purple wire from my harness was connected. Since the Pertronix does not have the post at the base, where should this wire be connected? I was thinking it should be connected to the positive side of the coil. If anybody has some info on this, please let me know. Oh, and I also took the ballast resistor out of the system, I figured it is no longer needed.

Thank you,
Magoo