User Tag List
Thanks: 0
Likes: 0
Results 1 to 1 of 1
Thread: Distributor conversion
-
06-06-2013, 01:33 PM #1Member
- Join Date
- Sep 2009
- Location
- California
- Posts
- 33
- Thanks (Given)
- 0
- Thanks (Received)
- 0
- Likes (Given)
- 0
- Likes (Received)
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Distributor conversion
Hello all,
I recently rebuilt my Chevy LS6 454. I replaced the Mallory dual point distributor with a Pertronix mag pickup distibutor. On the old Mallory there was a post on the base of the distibutor, where a purple wire from my harness was connected. Since the Pertronix does not have the post at the base, where should this wire be connected? I was thinking it should be connected to the positive side of the coil. If anybody has some info on this, please let me know. Oh, and I also took the ballast resistor out of the system, I figured it is no longer needed.
Thank you,
Magoo