Chrysler racing outboards

**FMP** · 10-25-2016, 04:22 PM

Wild pic, I found a few of that boat. I guy in Scandinavia rebuilt it , did the transom but i don't think he did the rest and broke the floor loose after some hard running in a race. He had a Chrysler on it then an L6 , not sure what's on it in this pic.

**FMP** · 10-25-2016, 04:31 PM

Originally Posted by racer

4 carbs seemed to work better with horizontal reeds. Built a few this way using 2 of the 3 cylinder front halfs. Rods are too short and light to run 10k.

So which set up do you like best? Did you ever build a TC four carb? Read once that it pulls hard up top compared to the WB four carb but lacked a bit down low. I always thought four TCs would work with more port

.

**FMP** · 11-19-2016, 11:29 PM

Originally Posted by kdtilt

This is the same Chrysler powered stacker on an E&T tunnel driven by 70 something year old Bill Edwards.

http://youtu.be/oYR7LFPQHME

Mr. Demeanor one of the other fast fours.

**FMP** · 01-02-2017, 01:21 PM

**FMP** · 01-02-2017, 01:22 PM

http://www.screamandfly.com/showthre...36#post2917836

**FMP** · 04-11-2017, 10:35 AM

http://www.muskokaseaflea.ca/Plans/TunnelMite.pdf

**25ss** · 05-09-2017, 02:25 AM

A friend of mine bought out an older outboard repair shop.
I was there recently and he has some chrysler nos parts.
Dont know all there is but has several nos controllers in the box
Says there are boxs of electronics also.
Let me know i can look for somthing for you.
Also he has one of the 150 hp 5 cylinders
Dale

**FUJIMO** · 06-08-2017, 11:59 AM

Chrysler Racing Gearcase...

**FUJIMO** · 06-08-2017, 12:12 PM

**dennispointmenace** · 06-08-2017, 01:23 PM

Originally Posted by FMP

Mr. Demeanor one of the other fast fours.

1937, USI 1972,almost 80,still running!!!!

**dennispointmenace** · 06-08-2017, 01:26 PM

would like to find some seals,shims & a set - 007 gear set, underdrive!!!

**dennispointmenace** · 06-08-2017, 01:42 PM

4 carb. was built using jet blk. 3 3/8,long stk. 103 ci.,big xst. chamber no old stacks, only jet x mani, str. pipe ran out of breath @ 6500 need 8500!!