User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2007
    Location
    Long Island
    Posts
    123
    Thanks (Given)
    0
    Thanks (Received)
    0
    Likes (Given)
    0
    Likes (Received)
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Question Fuel pump on a 175? Merc Black Max?

    I have a 1976 Merc 175hp Black Max on the pack of my vector that I picked up last summer. While I was taking apart the fuel system to put in a fuel cell, I found an old Walbro electric fuel pump hooked up to the system. Since the boat was untouched in storage for 14 yrs prior to me buying it, the gas in the pump melted all the rubber parts inside. I can get a rebuild kit for $15 for the pump, I think its a normal pressure pump, has no regulator, and is in between the tank and the motor. A mechanic I talked to was suprised that there wasn't a regulator, since they can put out alot of pressure. I figured either the engine needed it, or it was used so the engine didn't have to be primed by a primer ball. The engine was also worked before I bought it, raised from a 175 to probably 190 or 195hp, and has a vented exhaust w/ low water pickups. It also has carbs. Matthew Ramirez said ther should be a fuel pump from merc on the engine on the port side? The longest i've ran it was 10 seconds on the old fuel system till a line came off !!. Do I need the pump?

    engine - http://i209.photobucket.com/albums/b...ostream010.jpg
    http://i209.photobucket.com/albums/b...ostream011.jpg
    pump - it looks like the one on the left at the top of the page, autopulse series 2100 http://www.autoperformanceengineerin.../bel_pump.html

    Thanks!!!
    Last edited by Striker; 01-22-2008 at 09:25 PM.
    1973 Hydrostream Vector (under restoration)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •