User Tag List
Thanks: 0
Likes: 0
Results 1 to 9 of 9
Thread: Fuel Pump Question?
-
03-11-2002, 09:55 AM #1
Fuel Pump Question?
will the same pump that came stock on a '96 2.5 efi with a 36# digital brain feed enough fuel to supply an A-63 box with a 56# regulator....thanks
RIP Todd Carter, Ronnie, Galen...
You'll never be forgotten
-
03-11-2002, 10:05 AM #2
Yes..............
it will work fine. The older smaller Bosche won't do it but the bigger ones 056 etc. will go 90psi and still do the volume needed for a stock or somewhat modded 260. At 56psi on a drag , they will still work too but the Weldon is a better pump for high pressure AND high volume.
-
03-11-2002, 10:35 AM #3
-
03-11-2002, 11:49 AM #4
fuel pump
is the weldon a factory pump from merc. or an aftermarket one?..what did it come on?....thanks
RIP Todd Carter, Ronnie, Galen...
You'll never be forgotten
-
03-11-2002, 01:35 PM #55000 RPM
- Join Date
- Jan 2002
- Location
- Alabama
- Posts
- 188
- Thanks (Given)
- 0
- Thanks (Received)
- 0
- Likes (Given)
- 0
- Likes (Received)
- 0
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
fuel pump
dennymac;
the later bosch pump will have the # 0 580 254 957. you can probaly get this crossed out at a parts store and buy if for half of what merc wants.
-
03-11-2002, 04:44 PM #6
Merc. uses the Weldon now. I think it comes with the 280.
-
03-11-2002, 05:21 PM #7
fuel pumpsdoe
does anybody know what one of these big bosch pumps cost.
if ya need more than one for a260 if ya are spinning it pretty hard
or is a single pump good enough?
-
03-11-2002, 06:40 PM #8
A single works fine. Through Bosche they are around $250 to $300
-
03-11-2002, 07:12 PM #9
Fuel Pumps
Question:
I have two pumps, both new in the box. One is a Bosch in the Bosch box with P/N 61957 0 580 254 957 - 390. The Bosch has a nipple for hose and clamp on the suction side and a -6 AN fitting on the discharge. The other is from Kinsler Fuel Injection, no numbers on it. Looks similiar to the Bosch. It is fatter than the aforementioned pump and is set-up with -AN fittings on both ends. A -8 on the suction side and a -6 on the discharge. Anyone know what the differences are? ThanksWayne