Just had an issue with my starboard motor and thought someone on here may be able to help me diagnose the issue.
Was running fine with both engines
Gentleman & Ladies …
I posted this topic years ago, got **** from Dave H. ( MN - drove his XR02 ), and ended up with a nice thread
Hi looking for some cleavers, ish 12x22 or 12x21 over the hub. 13 spline. Spes. Some old OMC cleaver
Last Post By: BC Black Max Today, 12:39 PMCees van der Velden became a contributing force in the F1 Tunnel Boat Racing circuit.
I met Cees in 1971, just as he took off as a Flying
What does it take to make one run on an Allison?
Are they like a 2.5 merc where it is easy to get one set of solid mounts in and the whole
I have 2 20” offshore mids with adapter plates. Came off a 24 Skater. Yes they were used in salt water. Snouts are cut. Bushings are tight. Need
Hitting limiter all day with my 23 inch Trophy plus on 250 3.0 merc - Looking to step up to a 26 inch - Let me know what you have even if there are chips
Last Post By: Aaronhl Today, 11:33 AMPost a random photo thread! Add yours!
Post a random pic Thread i will Start Freeze Frame
Add yours
other forum has one of these
New rebuilt powerhead 10 page build
Never been on a boat yet has been run on stand only.
Uses custom trim with pump in the boat.
I posted
30" mercury pro-et 4 blade (stock)
32" mercury pro-et 4 blade (stock)
both are 9.5/10 (only because they are used)
both will
Whatcha got?
Last Post By: Stevelinder Today, 09:13 AMhttps://youtu.be/4Olk5AU_tfg?t=296
Last Post By: doug7488 Today, 08:46 AM
Any 22 Cougar MTR's out there?
Thread Starter: Still CrazyLooking for a 22 MTR SD or outboard. What's out there?
Last Post By: Still Crazy Today, 02:50 PM