PDA

View Full Version : Standard Jet for T2X



baldad45
07-20-2005, 11:58 PM
Can someone tell me the standard jet size for T2X with TC-3A carbs,also the range of jet size for different conditions .Thanks baldad45.

crazy horse
07-21-2005, 01:40 PM
My book shows the main for the TC-3A is .096 and the TC-3B is .086. ;)

jerry
07-22-2005, 12:14 PM
t2x usally rides in a 757 jumbo jet , to fit his swelled head ... lol

baldad45
07-23-2005, 12:00 PM
Thanks for the reply .I found those sizes after posting ,also a T2 with 93.5 .My engine is a T2 with T3A 3 carbs block serial # 4557812.It had .096 jets when I got it and never ran that good also tried .086 and that ran up to a point but could't get into higher revs.The reed block manifold has a tube running from top to bottom on the crank side of the reeds .I think it might have been a nitrous setup or is this just a different style primer setup?I always had problems starting this engine ,seemed to be too rich.Thanks again baldad45

Mark75H
07-23-2005, 12:53 PM
Just primer