PDA

View Full Version : Sportmaster Lower Unit for 2.5L Mercury



jrogers720
07-11-2008, 12:14 PM
I have a Mercury Sportmaster low water pickup lower unit for the 2.5 liter Mercury outboards. It is for a 20" shaft motor with 1.87 gears and a water pump. Unit is bolt on ready to go (just change the oil). Fresh water use only. No Prop. Asking $1700.

tlentzpms
07-11-2008, 04:23 PM
I need a sporty for my 2.4 bridgeport. Will your drive bolt on, and I need to know what size/diamiter your water pump pick up is.
Thanks Chris
Phone 262-613-2903

jrogers720
07-11-2008, 05:49 PM
This unit came off a 93 2.5L 200hp Merc. The water pump and bolt pattern is for that motor. I am not sure if this will bolt up to your motor. You'll have to check with your machanic.

patchesII
07-11-2008, 06:35 PM
the bolt pattern on ya'lls motor is the same. you'll just need to look to see if your water tube in the sportmaster is a 1/2 inch. i think thats what the bridgeport is but i could be wrong. i do know it will bolt up

graynester
07-12-2008, 07:03 AM
are bolt on and go.posibly u'll need to change front stud on the lower.u can do it man.lookx nice what year.B

tlentzpms
07-12-2008, 10:35 AM
The engine is older, I do not hav e serial number. The water pick up is larger than 1/2 inch. Any info would be apreciated.

jrogers720
07-15-2008, 05:26 PM
Did you get ahold of your machanic. Sounds like it should bolt on.

tlentzpms
07-16-2008, 10:20 AM
I will try to get the information that we need

graynester
07-16-2008, 02:04 PM
mybe just 1 stud need changed!!!!

tlentzpms
07-17-2008, 01:26 PM
what size stud do I need?

graynester
07-17-2008, 01:46 PM
but by the time u diside to get this lower it will be gone.B

graynester
07-17-2008, 01:47 PM
ill make u an offer.what shape is the drive shaft in?B 941-416-6071

150aintenuff
07-17-2008, 01:52 PM
all 2.0/2.4/2.5 lowers interchange, even a 3/4" watertube sporty can be adapted to fit a 1/2" adaptor plate with a few copper pieces from a plumbing supply store...

3.0L cases are different and are actually Alpha Gen 2 cases that can be bolted up to 98ish-newer alpha1 sterndrives with the shorter driveshaft and one hole machined out for oil transfer between upper and lower...

jrogers720
07-17-2008, 07:14 PM
The shaft looks good. No rust. Only used in fresh water. Call me Friday morning sometime. 760-402-9158.

Fish
07-17-2008, 10:36 PM
it sort of looks like there is a tab on the right side of the skeg. Maybe it is just my crappy monitor, but is this a left hand or a right hand sporty?

jrogers720
07-18-2008, 09:12 AM
It is a Right hand turn.

jrogers720
07-27-2008, 10:57 AM
I've got it on ebay now.

FASTBASSKY
08-06-2008, 04:28 PM
i Have A Mercury Sportmaster Low Water Pickup Lower Unit For The 2.5 Liter Mercury Outboards. It Is For A 20" Shaft Motor With 1.87 Gears And A Water Pump. Unit Is Bolt On Ready To Go (just Change The Oil). Fresh Water Use Only. No Prop. Asking $1700.
Is The Lower Still For Sale

jrogers720
08-06-2008, 08:50 PM
It sold.
Thanks,

what was I thinking?
08-10-2008, 08:15 PM
Still available? I'm seriously looking for a lower unit!

what was I thinking?
08-10-2008, 08:17 PM
Thanks anyways !